ZOY Zirconia analyzer ZOY-5-1200 ZOY-4 ZOY-5 ZOA-1000 ZOA-3-P1000 ZOA-4-1000 ZOA-3-P1200 TKFX-ZOA
Main technical parameters of ZOY zirconia analyzer:
0-25%, output: 4-20mA, 0-700 ℃ and 0-1400 ℃, SIC, 304316, diameter: 48mm, 51mm, 57mm; DN50,DN80,DN100； Outer diameter: 155mm, hole spacing: 130mm, K-type, zirconia probe flange: DN80, insertion depth length: 300-1200mm, protective tube material: 316L, protective tube diameter: 57mm, filter: silicon carbide intake tube, double-layer filter, range: 0-25%, instrument appearance: wall mounted, LCD display, accuracy: 1%, insertion depth: 600mm, diameter: 16mm, protective tube: ceramic thread: M27 * 2, range PH0-14, accuracy: 0.1, immersion depth: 3m, 4-20mA signal output, with on-site display, 220V, without HART protocol, split type, electrode cable 4m. 2 meters (DN40) accuracy level with UPVC installation bracket: measurement not less than 0.5 level, transmitter not less than 0.25 level, range: 0-200000 μ s/cm, plug-in installation with flow cup, accuracy 0.1, split type, with local display, 4-20mA signal, NF concentrated water conductivity meter output, four wire 24V, without HART protocol, electrode cable 9 meters, accuracy level: measurement not less than 0.5 level, transmitter not less than 0.25 level, matching UPVC connection accessories
Range: 0-25%
Output: 4-20mA
Power: less than 150W
Insertion depth: 300-1500mm (customizable)
Material of protective tube: recrystallized SIC, stainless steel 304, stainless steel 316
Flange size: DN50 (outer diameter: 155mm, hole spacing: 130mm)
Display instrument: LCD and LED
Wall mounted, vertical, horizontal, square
Accuracy: 1%
Smoke temperature: 0-700 ℃ (direct insertion type) and 0-1400 ℃ (high-temperature extraction type)
Selection Notice:
Temperature of flue gas
Pressure of smoke
Insertion depth length
Secondary instrument display mode
Flange size
Is it explosion-proof
Your message must be between 20-3,000 characters!
